Startsida
Hjälp
Sök i LIBRIS databas

     

 

Sökning: onr:5lsrblx13qn3ldcd > Designs and simulat...

Designs and simulations of silicon-based microphotonic devices [Elektronisk resurs]

Dai, Daoxin, 1979- (författare)
He, Sailing (preses)
Janz, Siegfried (opponent)
KTH Skolan för elektro- och systemteknik (EES) (utgivare)
Publicerad: Stockholm : KTH, 2005
Engelska 61
Serie: TRITA-TET/DA, 0349-7836 0349-7836
Läs hela texten
Läs hela texten
  • E-bokAvhandling(Diss. (sammanfattning) Stockholm : Kungliga Tekniska högskolan, 2005)
Sammanfattning Ämnesord
Stäng  
  • The characteristics of a silicon-on-insulator (SOI) rib waveguide, including the bending loss of a multimode bent waveguide and the birefringence of a rib waveguide, are analyzed by using a finite-difference method (FDM). Based on a detailed analysis for a multimode bent waveguide, an appropriately designed multimode bent waveguide for reducing effectively the bending loss of the fundamental mode is realized. The slab height and the rib width of an SOI rib waveguide are normalized with the total height of the silicon layer and a general relation between these two normalized parameters for a nonbirefringent SOI rib waveguide is established. Using this general relation, one can easily design a nonbirefringent SOI rib waveguide. The issue of multimode effect in the SOI-based microphotonic devices such as arrayed-waveguide gratings (AWGs), etched diffraction gratings (EDGs), and multimode interference (MMI) couplers is discussed in detail. Two kinds of taper structures are proposed for reducing the multimode effects in EDGs or MMI couplers. A bi-level taper is introduced to eliminate effectively the multimode effects in an EDG or an MMI coupler. The bi-level taper is very appropriate for an EDG demultiplexer since the Si layer is etched through simultaneously for both the grating and the bottom taper structure, and thus no additional fabrication process is required. For the simulation of an AWG demultiplexer, a fast simulation method based on the Gaussian approximation is proposed and two kinds of effective and accurate three-dimensional (3D) simulation modeling are developed. The first 3D model is based on Kirchhoff-Huygens diffraction formula. To improve the computational speed, the 3D model is reduced to a two-dimensional (2D) one by integrating the corresponding field distributions in the AWG demultiplexer along the vertical direction under an assumption that the power coupled to the higher order modes in the free propagation region (FPR) is negligibly small. The equivalent 2D model has an almost the same accuracy as the original 3D model. Furthermore, a reciprocity theory is introduced for the optimal designof a special structure used for flattening the spectral response of an AWG demultiplexer. In the second 3D simulation method, we combine a beam propagation method (BPM) and the Kirchhoff-Huygens diffraction formula. In this method, a 3D BPM in a polar coordinate system is used for calculating the light propagation in the region connecting the first FPR and the arrayed waveguides, and thus the coupling coefficient of each arrayed waveguide is calculated conveniently and accurately. In the simulation of the second FPR, due to the uniform arrangement of arrayed waveguides, only several arrayed waveguides are needed in the BPM window and thus the computational efficiency is improved. 

Ämnesord

Engineering and Technology  (hsv)
Electrical Engineering, Electronic Engineering, Information Engineering  (hsv)
Other Electrical Engineering, Electronic Engineering, Information Engineering  (hsv)
Teknik och teknologier  (hsv)
Elektroteknik och elektronik  (hsv)
Annan elektroteknik och elektronik  (hsv)
TECHNOLOGY  (svep)
Electrical engineering, electronics and photonics  (svep)
Electronics  (svep)
TEKNIKVETENSKAP  (svep)
Elektroteknik, elektronik och fotonik  (svep)
Elektronik  (svep)

Genre

government publication  (marcgt)

Indexterm och SAB-rubrik

Electronics
waveguide
silicon-on-insulator (SOI)
arrayed waveguide grating (AWG)
Elektronik
Inställningar Hjälp

Uppgift om bibliotek saknas i LIBRIS

Kontakta ditt bibliotek, eller sök utanför LIBRIS. Se högermenyn.

Om LIBRIS
Sekretess
Hjälp
Fel i posten?
Kontakt
Teknik och format
Sök utifrån
Sökrutor
Plug-ins
Bookmarklet
Anpassa
Textstorlek
Kontrast
Vyer
LIBRIS söktjänster
SwePub
Uppsök

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

Copyright © LIBRIS - Nationella bibliotekssystem

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy